Table of Contents
Advertisement
The longer the import source file, the more
time this operation will take before the “Com-
pleted” message appears.
6 Register the TO time location.
7 Select the Copy command.
In the [TRACK] “EditTrk” tab page, set “EditType”
to “CopyTrack.”
8 Select the clipboard as the copy source track num-
ber.
Set “SourceTrack” to “ Clip1 .” The number indi-
cates the number of tracks in the clipboard.
9 Select the copy destination track number.
Set “DestTrack” to track number “1.”
0 Specify the number of times that the data will be
copied.
Set “Times” to “1.”
A Execute the copy operation.
Select the “Exec.” button and press the [ENTER]
key. Reply “Yes” to the “AreYouSure?” prompt.
When the operation is completed, the display will
indicate “Completed.” Select the “OK” button and
press the [ENTER] key.
The data will be overwritten onto the copy
destination track.
B Verify the results.
Press the [TO/LOC3] key, play back from the TO
location, and listen to the data to verify that the
import was performed correctly. If necessary, you
can use Undo to return to the previous state.
Exporting to a WAV file
Here’s how the IN–OUT region of data of tracks 1 and 2
from song 001 can be exported as a stereo WAV file
named “Sound001.wav” to a DOS format external drive
“A:DOS” connected to the SCSI connector.
1 Select song 001.
2 Register the IN and OUT time locations. ( → p.97)
3 Select the Copy command.
In the [TRACK] “EditTrk” tab page, set “EditType”
to “CopyTrack.”
4 Select the copy source track number.
Set “SourceTrack” to track numbers “ 1–2 .”
5 Select the clipboard as the copy destination track
number.
Set “DestTrack” to “Clip.”
6 Execute the Copy command.
Select the “Exec.” button and press the [ENTER]
key. Reply “Yes” to the “AreYouSure?” prompt.
When the Copy operation is completed, the display
will indicate “Completed.” Select the “OK” button
and press the [ENTER] key.
7 Select the Export command.
Select the [TRACK] “Export” tab page.
8 Select the export destination drive.
Select the “DriveList” button and press the
[ENTER] key to access the dialog box. Select the
DOS format drive. In this example, select drive
“A.” Then select the “OK” button and press the
[ENTER] key to return to the [TRACK] “Import”
tab page.
9 Assign a name to the WAV file.
Select the “Rename” button, press the [ENTER] key
to access the dialog box, and modify the name. You
can input a name of up to eight characters.
The filename extension of .wav will be input
automatically.
0 Input the date and time for the WAV file.
Select the “Date” button, press the [ENTER] key to
access the dialog box, and enter the year, month,
date, hour, minute, and second.
A Execute the Export command.
If you are exporting a 24 bit song as a 16 bit
WAV file, make settings for “Bit” and “Dither.”
(→p.87)
Select the “Exec.” button and press the [ENTER]
key.
Reply “Yes” to the “AreYouSure?” prompt. When
the Export operation is completed, the display will
indicate “Completed.” Select the “OK” button and
press the [ENTER] key.
The Export operation cannot be executed if an
identically-named WAV file already exists.
Page 69
- Quick Links:
- Features
- Creating an Audio CD
Hide quick links:
Advertisement
Table of Contents
