Ul And Ulc Installation Requirements; Ul/Ulc Installation Cabinet Options; Central Station Signal Receiver Compatibility List - ICT PRT-ZX8-DIN Installation Manual

Protege din rail 8 input expander
Table of Contents

Advertisement

UL and ULC Installation Requirements

Only UL / ULC listed compatible products are intended to be connected to a UL / ULC listed control system.

UL/ULC Installation Cabinet Options

ULC Central Station Fire Monitoring, UL/ULC Central Station Alarm Installations
Cabinet Model
EN-DIN-24-ATTACK
ULC Fire Monitoring
Cabinet Model
EN-DIN-11V
EN-DIN-12
EN-DIN-31
EN-DIN-24
EN-DIN-24-ATTACK
Electronic Access Control System Installations
Cabinet Model
EN-DIN-12
EN-DIN-31
EN-DIN-24
EN-DIN-24-ATTACK
All cabinet installations of this type must be located inside the Protected Area.
UL
ULC
Not to be mounted on the exterior of a vault, safe or stockroom.
All cabinet internal covers and lids/doors must be connected to the cabinet's main ground point for electrical
safety and static discharge protection.

Central Station Signal Receiver Compatibility List

IP Receiver via Ethernet Port: ArmorIP Internet Monitoring Receiver. Internet monitoring software and
interconnected with a (DAXW/C) central station automation system software and compatible receiving
equipment.
CID Receiver via Onboard Modem: Any UL and ULC listed receiver that uses the Contact ID protocol.
PRT-ZX8-DIN | Protege DIN Rail 8 Input Expander | Installation Manual
UL/ULC Installation Listings
UL1610, UL1635, UL1076, ULC-S304, ULC-S559
ULC Installation Listings
ULC-S559
UL/ULC Installation Listings
UL294, UL1076, ULC-ORD-C1076-86, CAN/ULC-S319
23

Advertisement

Table of Contents
loading

Table of Contents