Trouble Inputs - ICT PRT-ZX8-DIN Installation Manual

For example, when input 9 is assigned to the expander within Protege, inputs 1 and 9 immediately operate as a
duplexed pair. The duplexed pairs are:
Inputs 1 and 9
⦁
Inputs 2 and 10
⦁
Inputs 3 and 11
⦁
⦁ Inputs 4 and 12
⦁ Inputs 5 and 13
⦁ Inputs 6 and 14
⦁ Inputs 7 and 15
⦁ Inputs 8 and 16

Trouble Inputs

Each input expander can monitor up to 16 trouble inputs.
Trouble inputs are used to monitor the module status and in most cases are not physically connected to an
external input.
The following table details the trouble inputs that are configured in the system and the trouble type and group
that they activate.
Input Number
ZXxxx:01-15
ZXxxx:16
Replace 'xxx' with the appropriate address of the module that you are programming.
PRT-ZX8-DIN | Protege DIN Rail 8 Input Expander | Installation Manual
Input Duplex Mode (1K and 2K4)
Input 1
N.C Input Contact
1K
Description
Reserved
Module Offline
Input 9
N.C Input Contact
N.C Tamper
2K4
Type
None
Module Offline
Group
None
System
13