Connection Of Audio Output; 2-Channel Stereo Connection - Kenwood DV-5050M Instruction Manual

1-6 Connection of Audio Output

Do not insert the power cord plugs of the player and the connected components until
all of the components have been connected.
For details on the connection terminals and functions of the AV amplifier, refer to its
instruction manual. The video output from the player should be connected directly
to the AV amplifier. If the video output is connected through a VCR, the picture
displayed on the TV may be disturbed due to the copy protect function.

1-6-1 : 2-channel stereo connection

You can enjoy stereo sound if you connect the TV or system component that has 2-
channel stereo connection.
DV-5900M
Connect to the MIX LINE OUTPUT connectors.
DV-5050M/DVF-J6050
Connect to the MIX LINE OUTPUT or AUDIO OUTPUT L/R connectors.
AUX IN
L
R
DAISY CHAIN AUDIO
M I X L I N E 6 C H . O U T P U T
FRONT SURROUND
INPUT OUTPUT
CONTROL
M A I N - S U B
S W I T C H
MAIN SUB2
SUB1
Illust Model : DV-5900M
÷ When playing a disc containing MPEG multi-channel audio recording, connect
the stereo input to the 6ch OUTPUT L/R terminals and activate the DOWN
MIX function (r).
÷ Read the instructions for the TV and speakers or system component for
connection details.
AUDIO
IN
L
R
Audio cable (Provided)
VIDEO
COMPONENT VIDEO S VIDEO
OUTPUT
I N P U T O U T P U T
INPUT OUTPUT
CENTER
L
COMPONENT
VIDEO 1
1 2
Y C B C R Y C B C R OUTPUT
2
R
SUB WOOFER INTERLACE PROGRESSIVE
(DV-5900M only)
For DV-5050M/DVF-J6050
DTS disclaimer clause
When playing DTS-encoded (CDs, LDs, DVDs), excessive noise will be exhibited
from the analog stereo outputs. To avoid possible damage to the audio system,
the consumer should take proper precautions when the analog stereo outputs of
the DVD player is connected to an amplification system. To enjoy DTS Digital
Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder
system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink)
of the DVD player.
For DV-5900M
DTS disclaimer clause
DTS Digital Surround™ is a discrete 5.1 channel digital audio format available on
CD, LD, and DVD software which consequently cannot be decoded and played
back inside most CD, LD, or DVD players. For this reason, when DTS-encoded
software is played back through the analog outputs of the CD, LD, or DVD player,
excessive noise will be exhibited. To avoid possible damage to the audio system,
proper precautions should be taken by the consumer if the analog outputs are
connected directly to an amplification system. To enjoy DTS Digital Surround™
playback, an external 5.1 channel DTS Digital Surround™ decoder system must
be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the CD, LD
or DVD player.
This unit is equipped with DTS Digital Surround™ decoder.
Chapter 1: Connection of Equipment
15