Playing The User File; To Clear The User File; To Initialize The User File - Kenwood DV-5050M Instruction Manual

Chapter 6: Specifying and Using Disc or Track Data

6-3-2 Playing the user file

(USER FILE PLAY mode)
Operation procedure
1.
Check that the unit is in the normal play TRACK
mode.
÷ Make sure that the disc door is closed.
2.
Press the MODE button.
÷ When the MODE button is pressed during USER
FILE PLAY mode, the USER FILE PLAY mode is
cancelled.
3.
Press the DISC + (up), – (down) button to select
"USER FILE", then press the SET button.
4.
Press the DISC + (up), – (down) button to select
"U.FILE PLAY", then press the SET button.
5.
Press the DISC + (up)/– (down) button to select a
user file number (1 to 8) and press the SET button.
÷ If user file names have already been registered, their
names are displayed.
"Assigning user file names"
÷ If the RANDOM button is pressed in this step,
random playback will start.
(Note that random playback is not available with
DVD-VIDEO discs.)
÷ If repeat playback is required, press the REPEAT
button.
58
÷ To view the discs registered in a "user file", press
the CHECK button. Each press of the CHECK
button will display the next disc registered in the
user file.
÷ To clear a disc from registration in a "user file",
play the disc to be registered and press the CLEAR
¤
button during playback.
To exit from MUSIC TYPE PLAY mode
Press the MODE button.

6-3-3 To clear the user file

The following procedure clears the registration of one
disc in the user files.
Operation procedure
1.
Check that the unit is in the normal play TRACK
mode.
÷ Make sure that the disc door is closed.
2.
Press the MODE button.
÷ When the MODE button is pressed during USER
O
FILE CLEAR mode, the USER FILE CLEAR mode is
cancelled.
3.
Press the DISC + (up), – (down) button to select
"USER FILE", then press the SET button.
4.
Press the DISC + (up), – (down) button to select
"U.FILE CLEAR", then press the SET button.
5.
6.
7.
(USER FILE CLEAR mode)

6-3-4 To initialize the user file

The following procedure clears the registration of all discs
¤
in the user files and the user file names. The user file
names return the default names after clear.
Operation procedure
1.
2.
3.
Press the DISC + (up)/– (down) button to select a
user file number (1 to 8) and press the SET button.
÷ If user file names have already been registered, their
names are displayed.
"Assigning user file names"
Press the DISC + (up)/– (down) button to select the
disc to be cleared, and press the SET button.
÷ Repeat step 6 as required.
÷ When the registration of all "User File" is deleted,
"NO ENTRY" will be displayed.
Press the MODE button to complete this operation.
(USER FILE INIT. mode)
Check that the unit is in the normal play TRACK
mode.
÷ Make sure that the disc door is closed.
Press the MODE button.
÷ When the MODE button is pressed during USER
FILE INIT. mode, the USER FILE INIT. mode is
cancelled.
Press the DISC + (up), – (down) button to select
"USER FILE", then press the SET button.
O
¤