Kenwood DV-5050M Instruction Manual page 84

Chapter 7 : Various Setups
Operation procedure
1.
While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "VISUAL" menu of "SET UP MENU".
2.
Press the ENTER button to open the setup screen.
VISUAL
Player Menu Language 7 English
Disc Menu Language 7 English
Audio Language 7 English
Subtitle Language 7 English
Still Mode 7 Auto
MENU
FL Mode 7 Brightness
Black Level Setup 7 0 IRE
¶ The "NTSC = PAL", "SCART Output Select" and
"Black Level Setup" settings are not displayed in
certain countries and areas.
3.
In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up or down button
and press the ENTER button.
4.
Select the Setting Item (refer to Right Table) by
pressing the cursor up or down button, then press
the ENTER button to enter the selection in memory.
¶ "
" : Select to return to the previous screen.
84
Table : SET UP MENU "VISUAL" Function & Setting (3/3)
Icon
NTSC = PAL
DVF-J6050
SCART Output
Select
(U.K. and
Europe only)
EXIT
(DV-5900M) Black Level
Setup
DV-5900M
DV-5050M
Function Item
Function
Icon
Switches if the signal from an On
NTSC format disc is to be
converted into PAL or not.
Off
Switches the output signals from Composite
the TV SCART connector.
S
RGB
This function makes the
7.5 IRE
adjustment of the black level. Set
to your preference and monitor's
ability.
0 IRE
Initial Position
Setting Item
DV-5900M
Means
Select to enable conversion from
NTSC to PAL.
–
Select to disable conversion from
NTSC to PAL.
Composite video signal.
–
S Video signals.
RGB signals.
Standard black level.
7.5 IRE
Expanded black level.
Other
Europe and
U.K. = On
Except for
Europe and
U.K. = Off
Composite
–