Channnel (5.1 Ch) Audio Connection; Digital Output Connection - Kenwood DV-5050M Instruction Manual

Chapter 1: Connection of Equipment
1-6-2 : 6 channnel (5.1 ch) audio connection (DV-5900M only)
When the connected AV amplifier has 6-channel audio input terminals, Please con-
nect the 6CH. OUTPUT terminals to them.
Speaker Setting
To 6ch Input terminal
DIGITAL D A I S Y C H A I N
(PCM/BIT STREAM)
MIX LINE
COAXIAL OPTICAL
INPUT OUTPUT
FRONT
I N CONTROL
MAIN-SUB
DVD
SWITCH
CONTROL
MAIN SUB2
OUT OUT
SUB1
Illust Model : DV-5900M
Setup for 6-channel audio connection:
÷ When the audio is connected using the 6CH. OUTPUT terminals, set the player
as follows. "Speaker Setting"
÷ When a DVD AUDIO disc is played, the player can output audio signals at very
high frequencies. As this may sometimes lead to speaker damage due to a high-
volume sound, do not set "Audio Filter" to "Filter 110 kHz" when the speakers
in use are not suitable for high-frequency reproduction.
÷ When connection of 3 or more channels is required, connect the audio inputs
to the 6ch OUTPUT connectors on the rear panel according to the speakers in
use.
After connection, set the non-used speakers to "OFF" with the "Speaker setting"
function.
16
A U D I O C O M P O N E N T V I D E O S VIDEO
6 C H . O U T P U T I N P U T O U T P U T INPUT OUTPUT
SURROUND CENTER
COMPONENT
L
VIDEO
OUTPUT
1 2
Y C B C R Y C B C R
R
SUB WOOFER INTERLACE PROGRESSIVE

1-6-3 : Digital output connection

Use the DIGITAL output terminal when using an external decoder (or an AV amplifier
with built-in decoder) to decode Dolby Digital and DTS Digital Surround signals.
To use the external decoder, it is required to change the "SOUND" setup in the Set Up
menu.
Speaker setting
The speakers are to be set up on the amplifier.
Audio filter (Speaker protect)
The audio filtering is to be set up on the amplifier.
VIDEO
OUTPUT
1
COAXIAL
2
Coaxial cable
(Provided)
DIGITAL
(PCM/BIT STREAM)
k COAXIAL
I N
O U T
j
Illust model : DV-5900M
k
Note : When connecting the optical digital audio cable
÷ Remove the dust protection cap from the optical digital audio output terminal
and connect the cable firmly so that the configurations of both the cable and
the terminal match.
÷ Keep the dust protection cap and reattach when not using the terminal.
OPTICAL
Optical cable
or
C O M P O N E N T V I D E O
D A I S Y C H A I N A U D I O
MIX LINE I N P U T
6 C H . O U T P U T
OPTICAL
INPUT OUTPUT FRONT SURROUND CENTER
CONTROL
L
M A I N - S U B
DVD S W I T C H Y C C
B R
CONTROL
R
MAIN SUB2
O U T SUB1 SUB WOOFER
Dust protection cap
h
k
j
Speaker Setting
VIDEO
S VIDEO
OUTPUT
O U T P U T INPUT OUTPUT
COMPONENT
VIDEO
OUTPUT
1
Y C C 1 2
B R
2
INTERLACE PROGRESSIVE
Align the plug
with the terminal