Speaker Setting - Kenwood DV-5050M Instruction Manual

Chapter 7 : Various Setups
7-4-2 "Speaker Setting" (DV-5900M only)
This unit has two kinds of speaker setting methods.
"Speaker Setting Custom"
This is the normal setting operation.
"Speaker Setting Quick"
This is the simplified setting operation.
a : Speaker Setting Custom
At the factory, the player has been set to the standard
setting with which the speakers can reproduce the 6-
channel signals as soon as the connections are made.
This setting can be changed according to each listening
environment. When you want to change this setting, be
sure to perform it in the listening area in your own
listening environment.
Operation procedure
1.
While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "SOUND" menu of "SET UP MENU".
2.
Press the ENTER button to open the setup screen.
3.
Press the cursor up, down button to select "Speaker
Setting (Custom)" in set up menu "SOUND", then
press the ENTER button.
78
Table : "Speaker Setting CUSTOM" Function & Setting (1/2)
Speaker Item
k
Speaker
Icon
L L ch front speaker
;
R R ch front speaker
C Center speaker
SL L ch surround speaker
SR R ch surround speaker
Function Item
Icon Function Icon
Normal
Low cut filter
Size
Large
0 to -12 dB ––
Level Set the volume level
Off
Center channel output
Size
ON/OFF Normal
Low cut filter
Large
Set delay time
0/1.3/2.6/
Delay
3.9/5.3
See "Delay Time Setting"
Time
A
Level Set the volume level
0 to -12 dB
Off
Surround channel output
Size
ON/OFF Normal
Low cut filter
Large
Set delay time
0/5.3/10.6/
Delay
15.9
See "Delay Time Setting"
Time
A
Level Set the volume level
0 to -12 dB
Setting Item
Initial
Position
Means
Select this position when
speaker is incapable of
reproduce audio below 100 Hz.
Large
Select this position when
speaker is capable of reproduce
audio below 100 Hz.
0 dB
No center channel output.
Select when Center speaker is
not used.
Select this position when
Large
speaker is incapable of
reproduce audio below 100 Hz.
Select this position when
speaker is capable of reproduce
audio below 100 Hz.
0 ms
––
0 dB
––
No surround channel output.
Select when Surround speaker is
not used.
Select this position when
Large
speaker is incapable of
reproduce audio below 100 Hz.
Select this position when
speaker is capable of reproduce
audio below 100 Hz.
0 ms
––
–– 0 dB