Table of Contents
Advertisement
Please refer to pages 14 and 15 for setup.
Select Audio Output
1 During stop mode, press MENU key on the re-
mote.
MENU
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the AUDIO SETUP, then press
the ENTER key to access the sub features
MULTI CONTROL
ENTER
3 Press Cursor up/down (5/∞) keys on the remote
to select AUDIO OUT, then press the Cursor
right (3) key to access the sub features
MULTI CONTROL
MULTI CONTROL
4 Press Cursor up/down (5/∞) keys on the remote
to select specific output mode, then press the
ENTER key.
MULTI CONTROL
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
MULTI CONTROL
ENTER
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
ENTER
Select LPCM Output
LPCM 48k : Even in case of 96 kHz digital signal,
DVD will deliver 48 kHz signal out.
LPCM 96k : In case of 96 kHz digital signal, DVD will
deliver 96 kHz signal out. In this case your
receiver should control 96 kHz signal.
1 During stop mode, press MENU key on the re-
mote.
MENU
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the AUDIO SETUP, then press
the ENTER key to access the sub features
MULTI CONTROL
ENTER
3 Press Cursor up/down (5/∞) keys on the remote
to select LPCM OUTPUT, then press the Cursor
right (3) key to access the sub features
MULTI CONTROL
MULTI CONTROL
4 Press Cursor up/down (5/∞) keys on the remote
to select specific output mode, then press the
ENTER key.
MULTI CONTROL
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
MULTI CONTROL
ENTER
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
19
Set Up functions
DVF-3070 (EN/E,T,X,Y)
ENTER
Advertisement
Table of Contents
