Preparation Of Standard Remote Control Unit; Preparation Of Keyboard Remote Control Unit; Standby Mode - Kenwood DV-5050M Instruction Manual

Chapter 1: Connection of Equipment
1-2 Preparation of Standard Remote
Control Unit
Installing the batteries:
Open the cover and insert the batteries (R03/AAA) by
observing the polarity marking.
\
Remote control range:
6m
30
¶ When the controllable distance of the standard
remote reduces, replace both batteries with new
ones.
12
1-3 Preparation of Keyboard Remote
Control Unit (DV-5900M only)
Installing the batteries:
Open the cover and insert the batteries (R6/AA) by
observing the polarity marking.
1
2
\
Remote control range:
30
¶ When the controllable distance of the keyboard
remote reduces, replace both batteries with new
ones.
\ \
3m
30 30
REMOTE CONTROL UNIT RC-KB2

1-4 STANDBY mode

While the "STANDBY" indicator of the unit is lit, a small
amount of current is flowing into the unit's internal
circuitry to back up the memory. This condition is
referred to as the standby mode of the unit. While the
unit is in the standby mode, it can be turned on from
the remote control unit.