Sound" Setting; When "Sound" Is Selected In "Set Up Menu - Kenwood DV-5050M Instruction Manual

Chapter 7 : Various Setups

7-4 "SOUND" Setting

7-4-1 When "SOUND" is selected in "SET UP
MENU":
"SOUND" is to be selected when you want to set the
audio output method when system components are
connected using the digital audio output connector of
the player.
When the system is connected using the 6CH. OUTPUT
jacks of the player, also select "SOUND" to set the
speakers, audio output during DVD or VCD search,
dynamic range control function and audio filters. (DV-
5900M only)
Operation procedure
1.
While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "SOUND" menu of "SET UP MENU".
2.
Press the ENTER button to open the setup screen.
SOUND
Digital Audio
PCM Down Conversion 7 On
Dolby Digital 7 Bitstream
DTS 7 Bitstream
MPEG 7 Bitstream
MENU
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search 7 On
Dynamic Range Control Wide
7
Audio Filter 7 Filter 60kHz
3.
In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up or down button
and press the ENTER button.
4.
Select the Setting Item (refer to Right Table) by
pressing the cursor up or down button, then press
the ENTER button to enter the selection in memory.
¶ "
" : Select to return to the previous screen.
76
Table : SET UP MENU "SOUND" Function & Setting (1/2)
Icon
Digital Audio
"PCM Down
Conversion"
Digital Audio
"Dolby Digital"
Digital Audio
"DTS"
EXIT
Digital Audio
"MPEG"
(DV-5900M)
Speaker Setting
(Custom)
(DV-5900M
only)
Speaker Setting
(Quick)
(DV-5900M
only)
Function Item
Function
Icon
Switches on/off the down- On
sampling conversion for the digital
signal output with a high sampling
rate.
Off
÷ With DVD AUDIO discs, the
signal is always output after
down sampling conversion.
Sets the Dolby Digital output. Bitstream
PCM
Sets the DTS output.
Bitstream
DV-5900M
PCM
Other
Bitstream
Off
Sets the MPEG output. Bitstream
PCM
k
;
Initial Position
Setting Item
DV-5900M
Means
Down-convert the signal to 44.1
kHz/16-bit PCM signal.
The analog output signals are
converted accordingly.
Skip down conversion.
On
÷ If the disc inhibits the 96 kHz
digital output, the signal is
down-converted even when this
setting is selected.
Bitstream signal.
Bitstream
48 kHz (2CH.) PCM signal.
Bitstream signal.
Bitstream
48 kHz (2CH.) PCM signal.
Bitstream signal.
Off
off
Bitstream signal.
Bitstream
48 kHz (2CH.) PCM signal.
Other
|
|
|