Select Audio Output; Select Lpcm Output - Kenwood DV-705 Instruction Manual

Please refer to pages 16 to 18 for setup.

Select Audio Output

1 During stop mode, press MENU key on the re-
mote.
MENU
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the "Audio" icon, then press
Cursor right (3) key.
"Audio" icon
MULTI CONTROL
MULTI CONTROL
3 Press Cursor up/down (5/∞) keys on the remote
to select "Digital Output", then press the Cursor
right (3) key to access the sub features
MULTI CONTROL
MULTI CONTROL
4 Press Cursor up/down (5/∞) keys on the remote
to select specific output mode, then press the
ENTER key.
MULTI CONTROL
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press the MENU key to return to previous display.
MENU
ENTER
MULTI CONTROL

Select LPCM Output

48kH : Even in case of 96 kHz digital signal, DVD will
deliver 48 kHz signal out.
96kH : In case of 96 kHz digital signal, DVD will de-
liver 96 kHz signal out. In this case your re-
ceiver should control 96 kHz signal.
1 During stop mode, press MENU key on the re-
mote.
MENU
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the "Audio" icon, then press
Cursor right (3) key.
"Audio" icon
MULTI CONTROL
MULTI CONTROL
3 Press Cursor up/down (5/∞) keys on the remote
to select "LPCM Output", then press the Cursor
right (3) key to access the sub features
MULTI CONTROL
MULTI CONTROL
4 Press Cursor up/down (5/∞) keys on the remote
to select specific output mode, then press the
ENTER key.
MULTI CONTROL
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press the MENU key to return to previous display.
MENU
Set Up functions
DV-705/DVF-R5070 (EN/K,P,E,Y)
ENTER
MULTI CONTROL
21