Tyres - Malaguti MISSION 125 Instruction Manual

Table of Contents

Advertisement

MAINTENANCE & SERVICING

TYRES

TYRE SPECIFICATION
Tyre Pressure (Front & Rear)
Tyre type
Front rim
Rear rim
Front tyre
Rear tyre
For best performance, longevity and safe operation of
your vehicle, please note the following tyre information.
Tyre pressure
Tyre pressure should be checked before every
journey and corrected if necessary. Check the tyre
pressure at least every time you refuel.
WARNING
Check tyre pressure when tyres are cold
(before driving off). Adjust tyre pressure
according to operating conditions.
Do not overload the vehicle! The higher the
load on the vehicle, the higher the pressure on
the tyres, brakes and steering. This can lead to
damage or accidents.
The weight distribution on the vehicle is
important for your safety and the performance
of the vehicle. Tie down your load properly and
load the heaviest loads centrally on the vehicle.
This will keep you in control of the vehicle.
16 Mission 125 / 200
2,0 bar
Tubeless
MT 3.00 x 13
MT 3.50 x 13
120/70-13 - 53P
130/70-13 - 63P
Tyre inspection
Tread depth
Sidewall
Wear indicator
WARNING
Check the condition of the tyres before every journey.
If a tyre shows cross lines (minimum tread depth), this
indicates damage. Have the tyre checked immediately
by a specialist and have the tyre replaced immediately
if necessary.
HINWEIS
The tread depth may differ depending on the country.
Observe the local regulations. The values given here
are technical values and may differ from the legal
values in your region.
WARNING
Driving with worn tyres is illegal, reduces
stability and can lead to loss of control of
the vehicle.
Have worn or damaged tyres replaced
immediately by your specialist dealer.
Work on tyres and wheels is the
responsibility of your specialist dealer.
1
3
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mission 200

Table of Contents