Setting
Service contact / Controller setup
Service contact
1
Press and hold the 3 buttons for 4
seconds or more simultaneously.
,
,
2
Select [Service contact].
3
Select the item to set.
4
Enter the name.
(Repeat the same procedure for all
characters.)
To change the character type
Select the character type with
and press
To enter space
Select [Space] with
5
Select [Conf].
6
Select on the screen for step 3.
(Contact number)
7
Enter the name.
(Repeat the same procedure for all characters.)
8
Select [Conf].
18
(EN)
(continued)
.
and press
To delete 1 character
Select [BS] with
press
.
.
Up to 16
characters
(Space is included
in the number of
characters.)
and
Up to 16
characters
(Space is included
in the number of
characters.)