1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Controller
  5. SFC-HC
  6. Instruction manual

Panasonic SFC-HC Instruction Manual

Handy controller exclusive for sf4c series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Handy Controller Exclusive for SF4C Series
SFC-HC (Ver. 2.0)
F U
N C
T I O
N
C A
N C
E L
E N
T E
R
© Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SFC-HC

Summary of Contents for Panasonic SFC-HC

  • Page 1 INSTRUCTION MANUAL Handy Controller Exclusive for SF4C Series SFC-HC (Ver. 2.0) T I O © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 2 (MEMO) © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 3 Thank you for purchasing Panasonic Industrial Devices SUNX’s Handy Controller SFC-HC (Ver. 2.0) exclusive for SF4C series. Please read both the instruction manual of this manual and SF4C series carefully and thoroughly for the correct and optimum use of this device.

  • Page 4: Table Of Contents

    3-2-13 Copy Function (Only for Ver. 2.0 or later of SF4C series) ·························· 35 3-2-14 Initialization Function ········································································ 37 CHAPTER 4 TROUBLESHOOTING ..............38 CHAPTER 5 SPECIFICATIONS / DIMENSIONS ..........39 6SHFL¿FDWLRQV ......................39 Dimensions ......................39 © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 5: Chapter 1 Introduction

    In case this device does not perform properly, the operator should report this to the person in charge and stop the machine operation immediately. The machine must not be operated until FRUUHFW SHUIRUPDQFH RI WKLV GHYLFH KDV EHHQ FRQ¿UPHG © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 6 Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. Maintenance Clean this device with a clean cloth. Do not use any volatile chemicals. Other Never reassemble or remodel this device. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 7: Chapter 2 General Outline

    Initialization function Part Descriptions Female connector Male connector Cable (0.5m) FUNCTION indicator × 9 (Green) FUNCTION switch FUNCTION Digital display (Red) - switch + switch CANCEL switch ENTER switch CANCEL ENTER © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 8: Connecting / Setting Procedures

    3. Then, inspect the SF4C series. REFERENCE Refer to “Chapter 4 Maintenance” of the SF4C series instruction manual for the details of the inspection of the SF4C series. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 9 In case the connecting cable with connector on one end connected the cable type of SF4C series or the intermediate connector type to this device, lead wire may be discon- nected. Be sure the lead wire is not disconnected. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 10: Chapter 3 Functions

    (YHQ LI WKH SRZHU LV WXUQHG 21 DJDLQ WKH ¿[HG EODQNLQJ IXQFWLRQ VWLOO VWD\V YDOLG :KHQ WKH ¿[HG EODQNLQJ IXQFWLRQ LV XVHG WKH UHFHLYHG OLJKW LQWHQVLW\ LQGLFDWRU RI SF4C se- ries is turned OFF regardless of the received light intensity. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 11: Floating Blanking Function

    ø85mm ,I WKH ÀRDWLQJ EODQNLQJ IXQFWLRQ LV XVHG WKH LQFLGHQW OLJKW LQWHQVLW\ LQGLFDWRU LV WXUQHG 2)) when an obstacle exists in the sensing range regardless of the incident light intensity. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 12: Auxiliary Output Switching Function

    (OSSD 1 / 2) is in ON sate, however, the auxiliary output becomes OFF since the SF4C series has been detecting the obstacle. 3) The state of the auxiliary output remains the same even if the SF4C series state changes. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 13: Muting Setting Changing Function

    ,Q FDVH PDNLQJ YDOLG WKH LQYDOLG VHWWLQJ RI ERWK HQG EHDP FKDQQHOV RI WKH ÀRDWLQJ EODQN- ing function, set invalid the muting function of both ends of beam channels in each beam channel setting of muting function. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 14 The setting method is to set the each beam channel setting of muting input condition 1 to 2 and set the each beam channel setting of muting input condition 2 to 1. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 15: Override Setting Changing Function

    In case of using SF4C as safety sensor. Control output 1 Response time of safety sensor + re- (OSSD 1) sponse time of SF4C series Control output 2 = 7ms + 7ms = 14ms (OSSD 2) © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 16: Large Multi-Purpose Indicator Setting Changing Function

    2) The large multi-purpose indicator (red) and the large multi-purpose indicator (green) can be lit up and blinked in same time. Furthermore, large multi-purpose indicator (red) can be blinked in lockout status. Lockout blinking display function Lockout ON Valid Blinks in red Invalid © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 17: Interlock Setting Changing Function

    Setting of the interlock setting changing function Setting of the external device monitor setting changing function Setting of the protect function Model No. / the number of beam channels of SF4C series. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 18: Copy Function (Only For Ver. 2.0 Or Later Of Sf4C Series)

    Password 0000 Protective function (Note1) Select function Invalid Notes: 1) Protective function in Ver. 2.1 of SF4C series is not initialized. 2) Setting data of copy function is not initialized. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 19: Function Setting (Operation Procedure)

    To “3-2-12 Setting Contents Monitoring Function” (Only for Ver. 2.0 or later of SF4C series) To “3-2-13 Copy Function” (Only for Ver. 2.0 or later of SF4C series) To “3-2-14 Initialization Function” © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 20 OFF. (Except “3-2-11 Protective Function”) However, if the power is turned ON again Remarks without changing the protective function to invalid, the password have to be input again since the protective function is still valid. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 21: Fixed Blanking Function

    Function Setting 3-2-1 Fixed Blanking Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 22: Floating Blanking Function

    Function Setting 3-2-2 Floating Blanking Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 23: Auxiliary Output Switching Function

    Function Setting 3-2-3 Auxiliary Output Switching Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 24: Muting Setting Changing Function

    Function Setting 3-2-4 Muting Setting Changing Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 25 Function Setting © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 26 Function Setting © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 27: Override Setting Changing Function

    Function Setting 3-2-5 Override Setting Changing Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 28: Muting Lamp Diagnosis Function

    Function Setting 3-2-6 Muting Lamp Diagnosis Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 29: Safety Input Setting Changing Function

    Function Setting 3-2-7 Safety Input Setting Changing Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 30: Large Multi-Purpose Indicator Setting Changing Function

    Function Setting 3-2-8 Large Multi-purpose Indicator Setting changing Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 31: Interlock Setting Changing Function

    Function Setting 3-2-9 Interlock Setting Changing Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 32: External Device Monitor Setting Changing Function

    Function Setting 3-2-10 External Device Monitor Setting Changing Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 33: Protective Function

    Function Setting 3-2-11 Protective Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 34: Setting Contents Monitoring Function (Only For Ver. 2.0 Or Later Of Sf4C Series)

    Function Setting 3-2-12 Setting Contents Monitoring Function (Only for Ver. 2.0 or later of SF4C series) © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 35 Function Setting © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 36: Copy Function (Only For Ver. 2.0 Or Later Of Sf4C Series)

    Function Setting 3-2-13 Copy Function (Only for Ver. 2.0 or later of SF4C series) © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 37 Function Setting © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 38: Initialization Function

    Function Setting 3-2-14 Initialization Function © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 39: Chapter 4 Troubleshooting

    (Failure on EEPROM data) Note: The factory setting of the SF4C series password is “0000.” If the device does not work correctly after checking the items above, please consult us. © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...

  • Page 40: Chapter 5 Specifications / Dimensions

    Note: There may be a case that the copied data through the copy function is deleted due to external causes. After the copy func- tion was used, check the copied data. Dimensions (Unit: mm) 25.4 ø6 cable 0.5m long © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 41 Revision history First edition September 10, 2009 Second edition November 20, 2009 Third edition April 13, 2011 Fourth edition March 1, 2013 © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 42 (MEMO) © Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SFCHC No.0037-80V...
  • Page 43 (2) Any Products found to be defective must be shipped to Panasonic Industrial Devices SUNX with all ship- ping costs paid by Purchaser or offered to Panasonic Industrial Devices SUNX for inspection and examina- tion.
  • Page 44 2YHUVHDV 6DOHV 'LYLVLRQ +HDG 2I¿FH 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Phone: +81-568-33-7861 FAX: +81-568-33-8591 About our sale network, please visit our website. PRINTED IN JAPAN © Panasonic Industrial Devices SUNX Co., Ltd. 2013...
  • Page 45 Safety Light Curtains Click to view products by manufacturer: Panasonic Other Similar products are found below : F39EJR SFB-HC F39GCN4D F39JG10BL 405250010 406500050 70230-1180 SFB-CCB7 F39-LJ1 F39-LJ2 40552-0100 40553-0150 F39-GWUM F39-PTJ F3SJ-E0465P25 MS-SFD-3-6 SFD-CCB7-MU SF4D-H8 FF-SPS47TRG 120257-0039 120257-0036 120257-0034...

Table of Contents