Table of Contents
Advertisement
3.
Docking Assembly Installation
§ Prior to installing the docking assembly, ensure that the drain fitting is oriented (right or left) correctly for your
installation. An optional straight drain fitting is also supplied. You may need to remove the back panel of the
docking assembly in order to re-orient or change the drain fitting. Replace back panel prior to mounting the
docking assembly.
§ Docking station must be secured in accordance with these instructions to ensure ice machine stability.
§ Ventilation openings in the docking station should be clear of obstruction. Failure to do so could result in
damage to equipment.
§ Plug must be accessible after final installation.
§ Remove protective tape from gaskets
§ Mount docking assembly using two screws provided.
6
WARNING!
.
Horizon 710/1010/1410
—
§ Apply gaskets
➊
.
§ Install shuttle actuator
and secure with locking nut
–
˜
–
➋
through dispenser top
➌
.
BIN • TOP-MOUNT
Advertisement
Table of Contents
