Table of Contents
Advertisement
5.9
Cooling lines and power
➊
§ Connect cooling water lines to ice machine
(Water "Out" connects to water regulator.)
§ Water valve is set at the factory. DO NOT remove
seal or adjust water valve
5.11
Plate
§ Position plate into opening and secure with supplied
screw.
WARNING!
Plate must be securely installed to ensure proper
equipment ground.
12
➋
➊
➋
.
Horizon 710/1010/1410
5.10
Power cord
§ Remove twist tie.
.
§ Carefully pass plug through opening and plug into
wall outlet.
§ For H_E units, install a suitable plug.
5.12
TDS switch
§ Set the TDS switch on the elctrical box.
– HIGH: for extended service life
– LOW: for low-scale water
TDS
HIGH
CLEAN
LOW
BIN • TOP-MOUNT
Advertisement
Table of Contents
