Charging The Rechargeable Battery; Maintenance And Care; Troubleshooting; Disposal - LIVARNO LUX 282449 Assembly, Operating And Safety Instructions

Press the ON / OFF button
on during darkness.

Charging the rechargeable battery

Note that the product must be switched on when the rechargeable
battery is charging.
The charging time of the rechargeable battery when the solar cell
is used depends on the intensity of the sunlight and the angle of
incidence of the light on the solar cell
perpendicular as possible to the angle of incidence of the light.
In this way you will receive the highest light levels.

Maintenance and care

The LEDs cannot be replaced. The product is maintenance-free,
2
except for any necessary change of rechargeable battery.
Clean the product regularly with a dry, lint-free cloth. Use a
slightly dampened cloth to remove more stubborn dirt.

Troubleshooting

Note: This product has delicate electronic components. This means
that if it is placed near an object that transmits radio signals, it could
cause interference. If you notice that the product is malfunctioning,
remove any sources of interference from the area of the product.
Note: Electrostatic discharges may cause product to malfunction.
In the event of such malfunctions, remove the rechargeable battery
briefly and reinsert them.
Error
The light will not
switch on even
though the sun shone
on the product all
day.
The light does not
come on or comes
on only briefly.

Disposal

The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
The Green Dot is not valid for Germany.
Observe the marking of the packaging materials for
waste separation, which are marked with abbreviations
b
a
(a) and numbers (b) with following meaning: 1–7:
plastics / 20–22: paper and fibreboard / 80–98:
composite materials.
The product and packaging materials are recyclable,
dispose of it separately for better waste treatment. The
Triman logo is valid in France only.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
to enable the product switching
5
1
Cause
Artificial sources of
light, e.g. street
lighting, are inter-
fering with the
product.
The rechargeable
battery is broken or
there was not
enough daylight.
. Place the solar cell
Solution
Mount the product in
a place where it can-
not be disturbed by
other sources of light.
Replace the recharge-
able battery or mount
the product in a place
where it can receive
more sunlight.
1
as
1
GB/MT 27