Mahlkonig X54 Original Instructions Manual page 55

Fault
Error
message
E003 is
shown in
the error
menu.
Error
message
E004 is
shown in
the error
menu.
Error
message
E008 is
shown in
the error
menu.
Cause / Remedy
The grinder automatically switches to manual
grinding degree mode. This mode cannot
be exited by any means as long as this error
code is active.
Please contact the customer service
»
for Mahlkönig products
and service"]
An LED in the display has failed.
1. Switch the grinder off and on again
„Switching off the grinder"] / [see „Switching on
the grinder"]
2. If the error message remains, contact
the customer service for Mahlkönig
products
Product identification in the log files is not
possible.
1. Switch the grinder off and on again
„Switching off the grinder"] / [see „Switching on
the grinder"]
2. Please contact the customer service
for Mahlkönig products
and service"]
Home Grinder X54
.
.
[see „Maintenance and service"]
.
.
[see „Maintenance
[see
.
[see
[see „Maintenance
55