Table of Contents
Advertisement
Selecting the installation location
Select a place for the grinder that meets the following
criteria:
•
level, stable and vibration-free surface;
•
supporting surface non-slip and dry;
Socket for the power connection within easy reach;
•
•
Grinder and power cable are out of the reach of small
children.
Some cleaning products contain ingredients
which attack the rubberised feet (9) of the
grinder. This causes the grinder to lose stability.
»
Setting up the grinder
Always grasp the grinder body (8) when lifting
or moving the grinder. This gives you the best
grip on the grinder and you do not run the risk
of accidentally damaging the more sensitive
areas* of the grinder.
1. Place the grinder in the desired installation location.
The grinder must stand securely on the five rubber-
ised feet (9) and may not wobble.
*
These include both the components which should not be accidentally
operated or adjusted (the START/STOP button (28), the spout (13), etc.)
and the housing recess for the drip tray (10), which can break off if the
load is too great or unfavourable.
Therefore, only use water and mild
cleaning products to clean the standing
surface.
Home Grinder X54
23
Advertisement
Table of Contents
