EK43 | EK43 S | EKK43 | EN Scope of delivery Name Bean hopper with lid Bean hopper intake On switch I Off switch 0 Lever for bag clamp / knocker Collec ng tray Spout Bag clamp / knocker Hand wheel (grind adjustment)
COMMERCIAL COFFEE GRINDER EK43 | EK43 S | EKK43 Contents Overview ......2 Cleaning ......22 Cleaning the surface underneath Scope of delivery ....9 the grinder ........23 General informa on ..11 Cleaning the casing ..... 23 Reading and storing the instruc on Cleaning the bean hopper ..
Only then will you be able to use the commercial coff ee grinder safely and without risk. For greater clarity, the commercial coff ee grinder EK43 | EK43 S | EKK43 will be referred to below simply as the “grinder”.
Page 12
COMMERCIAL COFFEE GRINDER Declara on of Conformity (see “Declara on of Conformity” sec on): Products marked with this symbol fulfi ll all applicable Community direc ves of the European Economic Area. ETL Listed Mark: Products marked with this symbol meet the requirements for electrical product safety in the United States of America.
EK43 | EK43 S | EKK43 | EN Safety Intended use The grinder is designed to grind whole roast coff ee beans. If necessary, the grinder can be used to grind other foods, such as certain types of grain. Contact your retailer for informa on on this. The grinder should only be used to grind the materials for which it has been designed.
Page 14
COMMERCIAL COFFEE GRINDER not protected in this way, have a 16 A-slow fuse fi ed by a qualifi ed electrician. – Install the grinder only in loca ons where its use can be super- vised by trained personnel. – Do not immerse the grinder or the power cable/power plug in water or any other liquids.
Page 15
EK43 | EK43 S | EKK43 | EN WARNING! Danger for children and persons with reduced physical, sensory or mental capaci es (e.g. par ally disabled persons, elderly persons with limited physical and mental capaci es) or a lack of experience and knowledge (e.g.
COMMERCIAL COFFEE GRINDER Before fi rst use Checking the grinder and scope of delivery NOTE! Risk of damage! Opening the packaging incau ously with a sharp knife or other point- ed objects can damage the grinder. – Proceed very carefully when opening. 1.
EK43 | EK43 S | EKK43 | EN Connec ng the poten al equaliza on The connec on for poten al equaliza on (12) is located on the back of the grinder (see Fig. C). The electrical connec on and tes ng of electronic func- onality must be carried out by an electrician.
To put the grinder into opera on again, for the EK43, EK43 S fi rst press the off switch 0 (4). For the EKK43 turn the rotary switch to (19) posi on 0 (off ). Disconnect the power plug (14) and then push the release bu on (15) in.
(11) encloses the bean hopper (1) in the direc on of the grinding mechanism. 2. Switch on the grinder (for EK43, EK43 S by pressing the On switch I (3), for EKK43 by se ng the rotary switch (19) to posi on 1 or 2).
COMMERCIAL COFFEE GRINDER Star ng the grinding process 1. Start the grinding process (for EK43, EK43 S by pressing the On switch I (3), for EKK43 by se ng the rotary switch on the grinding mechanism (19) to posi on 1 or 2, whichever you wish to use to grind your beans).
Page 21
EK43 | EK43 S | EKK43 | EN 3. Pour the new coff ee beans into the bean hopper. 4. Open the bean hopper by pulling out the slider.
COMMERCIAL COFFEE GRINDER Cleaning CAUTION! Risk of injury! The grinder can fall over and cause injury when it is being moved. – Place the grinder on a stable, lt-proof surface. – Only move or transport the grinder with the help of another person.
4. Place the grinder back onto the cleaned surface. Cleaning the casing 1. Switch off the grinder (for EK43, EK43 S by pressing the Off switch 0 (4), for EKK43 by se ng the rotary switch (19) to posi on 0) and remove the power plug (14) from the socket.
7. Close the bean hopper by pushing in the slider. 8. Remove the residue from the spout by tapping the knocker a few mes. 9. Switch off the grinder (for EK43, EK43 S by pressing the Off switch 0 (4),...
Page 25
10. Wipe down the bean hopper with a dry, lint-free cloth. 11. Switch on the grinder (for EK43, EK43 S by pressing the On switch I, for EKK43 by se ng the rotary switch to posi on 1 or 2).
COMMERCIAL COFFEE GRINDER Troubleshoo ng Problem Cause Solu on Using the hand wheel, set the grinder The grinder is • The spout is humming but clogged. to the coarsest grinding degree and not grinding. start the grinding process. The grind- er will free itself.
Page 27
EK43 | EK43 S | EKK43 | EN Problem Cause Solu on Insert the power plug into a properly The grinder is • The power plug neither grinding is not plugged installed socket. nor humming. into a socket. Check whether the release bu on •...
EK43 | EK43 S | EKK43 | EN Disposal Disposing of the packaging Dispose of the packaging by properly sor ng the recyclable mate- rials. Dispose of cardboard as paper waste and plas c as recyclable materials. Disposing of the grinder...
Kaffeemühle Product designation: Coffee grinder Typenbezeichnung: EK43, EK43 S, EKK43 Type: Der oben beschriebene Gegenstand der Erklärung erfüllt folgende Richtlinien, Verordnungen und Normen. The object of the declaration described above is in conformity with the following directives, regulations and standards.
Need help?
Do you have a question about the EK43 and is the answer not in the manual?
Questions and answers