Cleaning The Grinder Mechanism - Mahlkonig X54 Original Instructions Manual

Home Grinder X54

Cleaning the grinder mechanism

The manufacturer recommends cleaning with
GRINDZ™ grinder cleaner.
You will find more information on GRINDZ™ at
www.mahlkoenig.de.
Clean the grinder regularly* to prevent fluctua-
tions in the dosage and premature wear.
1. Set the grinding degree to a medium setting
[see „Adjusting the grinding degree"]
2. Remove the bean hopper (1) with any espresso/
coffee beans which it may still contain
the bean hopper"]
3. Insert the container module (21) in the module area
(11)
[see „Inserting the container module"]
4. Pour the grinder cleaner into the grinding mechanism
directly from above.
Observe the quantities specified by the manufacturer
for the grinder cleaner you are using.
5. Remove any excess grinder cleaner from the bean
hopper intake (4).
6. Reinsert the bean hopper but keep it closed to the
grinding mechanism (sliding valve (3) in position 2)
[see „Inserting the bean hopper"]
* The intervals at which you should clean the grinder mechanism depend
on your usage behaviour, amongst other things. Clean the grinder mech-
anism at least once a week with frequent use.
48
.
.
.
[see „Removing
.