Mahlkonig X54 Faq

Mahlkönig X54 home grinder FAQ part 1 (general)
General
Some facts about the X54
§ Developed in Switzerland in 2019/2020; start of production in Q1 of 2021
What is special about the X54
§ The X54 is one of few grinders that combines real espresso fine grinding (ca. 200 um) and filter grinding (500um and above) in one machine with easily interchangeable
front modules
§ The X54 offers four predefined recipes that can be adjusted to user requirements
§ The X54 uses 54mm flat special steel discs for gentle grinding and best taste
§ The X54 emits very low noise while grinding at less than 70 dB(A)
How do I adjust the portafilter holder to the portafilter of my espresso machine?
§ Please follow the operating instructions, or:
§ Remove the portafilter module
§ Turn over the portafilter module and loosen the screw of the bottom portafilter support part with a standard screw driver. Once loose, adjust its height until the portafilter of
the espresso machine fits tightly into the portafilter module.
§ Fasten the screw and remove the filter holder
§ Place the portafilter module back into the X54 grinder and fasten it securely
§ The portafilter holder should now fit tightly and allow for "hands free" grinding
What is the capacity of the hopper of the X54?
§ Appr. 500g / 1.1lbs
What is the weight of the X54?
§ Net weight: appr. 5kg / 11 lbs
What is the grind speed of the X54?
§ Appr. 1 g/s (finest grinding for espresso)
§ Appr. 2.5-2.8 g/s (coarse grinding)
Which factors does the grind speed of the X54 depend on?
§ Origin and type of coffee (e.g. arabica, robusta, etc. ),
§ Size and hardness of beans, degree of roasting and cooling method after roasting (i.e. moisture content of the bean)
§ Cleaning status of grinder
§ Other external influences (humidity, temperature, etc.).
1