Setting The Time For The Sleep Timer - Mahlkonig X54 Original Instructions Manual

Home Grinder X54
The display changes to the last selected recipe/mode*.
If you do not make any settings for more than
5 seconds (by turning/pressing the controller
(Jogdial)), the process will be cancelled.

Setting the time for the sleep timer

1. Use the controller (Jogdial) (26) to set the Manual
Grinding mode.
2. Press and hold down the controller (Jogdial) (26) and
the START/STOP button (28) simultaneously (approx.
2-3 seconds).
You enter the setting mode for the sleep timer.
Four underscores appear in the display (27) at one
second intervals.
After four seconds, the display changes and the text
autO slEE P in is displayed.
3. Release the depressed control elements and turn the
controller (Jogdial) clockwise or anticlockwise to select
the desired time for the sleep timer.
Possible selection for setting the time of the sleep timer:
3 min, 5 min, 10 min, 20 min and 30 min.
4. Press and hold down the controller (Jogdial) again
(approx. 2-3 seconds) to confirm the time setting for
the sleep timer.
The display changes to the last selected recipe/mode**.
* The last selected recipe or mode means the option which the user last
set for at least 3 sec.
** The last selected recipe or mode means the option which the user last
set for at least 3 sec.
40