Troubleshooting - Mahlkonig X54 Original Instructions Manual

Home Grinder X54

Troubleshooting

Fault
The grinder
is not
grinding,
the display
is not lit up.
The grinder
does not
grind, the
display
shows error
message
E001 .
50
Cause / Remedy
The power plug is not plugged into a socket.
Insert the power plug into a properly
»
installed socket.
The overcurrent protection switch was
triggered.
Check whether the circuit breaker's
»
release button (16) has popped out.
Push it back in if necessary.
If the button continues to pop out,
»
contact the customer service for
Mahlkönig products
and service"]
The electrical fuse has tripped.
The bean hopper has not been inserted.
Insert the bean hopper
»
bean hopper"]
[see „Maintenance
.
[see „Inserting the
.