Filling With Espresso/Coffee Beans - Mahlkonig X54 Original Instructions Manual

Home Grinder X54
The portafilter support (20) is lowered as far as it will go.
2. insert the portafilter (24) in the portafilter intake (19)
of the module.
3. Push the portafilter support upwards until the
portafilter fits exactly between the portafilter support
(bottom) and the portafilter intake (top).
4. Hold the portafilter support in position and fix it by
tightening the screw of the portafilter support clock-
wise with a screwdriver.

Filling with espresso/coffee beans

Always fill the bean hopper (1) with espresso or
coffee beans after it has been inserted in the
grinder
the bean hopper with beans and then insert it.
1. Remove the lid (2) from the bean hopper (1).
2. Fill the bean hopper with whole roasted espresso or
coffee beans from above.
The maximum filling quantity should be
approx. 1 cm below the edge of the bean
hopper.
3. Replace the lid on the bean hopper.
4. If necessary, push the sliding valve (3) as far as it will
go in the guide in the bean hopper.
The sliding valve opens up the bean hopper to the
grinding mechanism (position 3).
30
[see „Inserting the bean hopper"]
. Do not fill