Selecting The Collecting Receptacle (Portafilter Vs. Container); Using The Portafilter Module; Inserting The Portafilter Module - Mahlkonig X54 Original Instructions Manual

Selecting the collecting receptacle
(portafilter vs. container)
The scope of delivery includes two different modules for the
respective collecting receptacles*:
• You use a portafilter (24) with the portafilter module (18)
(see Fig. H)
• You use a container (25) with the container module (21)
(see Fig. I)

Using the portafilter module

Inserting the portafilter module

To ensure that your portafilter (24) is optimally
seated in the portafilter module (18), you need
to adjust the portafilter support (20) to a suit-
able height for your portafilter
portafilter module"]
Make this adjustment before inserting the
portafilter module.
1. Place the correctly aligned portafilter module (18) on
the module area (11) under the spout (13) (see Fig. J).
The two pins on the back of the module are aligned
with the corresponding holes in the module area and
the opening in the module is located in front of the
portafilter switch (12).
2. Press and hold down the pushbutton on the side (7)
and slide the module into the module area.
* Portafilter () and container
[see „Using the portafilter module"]
[see „Using the container module"]
.
Home Grinder X54
.
.
[see „Adjusting the
27