Pressure Test - Samson 2357-3 Mounting And Operating Instructions

Pressure build-up regulator

Hide thumbs Also See for 2357-3:

Table of Contents

Installation

5.4.2

Pressure test

Note

The plant operator is responsible for

performing the pressure test. SAMSON's

After-sales Service can support you to plan

and perform a pressure test for your plant.

NOTICE

Risk of regulator damage due to a sudden

pressure increase and resulting high flow

velocities.

Î Slowly open the shut-off valves.

During the pressure test, make sure the fol-

lowing conditions are met:

Î Do not allow the pressure to exceed the

1.5 times the pressure rating of the valve

body.

Î Make sure that the pressure rises simulta-

neously upstream and downstream of the

regulator to avoid damaging it.

5-6

EB 2559 EN

Table of Contents