Installation adjustment mode
CRT Projection angle adjustment
Note
How to adjust the projection angle
ENTER
ENTER
ENTER
ENTER
CRT PROJECTION ANGLE
ADJUSTMENT
CRT PROJECTION ANGLE IS THE
FIRST STEP OF STATIC
CONVERGENCE ADJUSTMENT.
IT IS CRITICAL THAT THE
RASTERS ARE CENTERED ON
THE CRT FACE PLATES PRIOR
TO PERFORMING THIS STEP.
<ENTER> TO CONTINUE
<EXIT> TO RETURN
menu 1
image 7.5
CRT Projection angle adjustment
CRT PROJECTION ANGLE
ADJUSTMENT
DURING THIS PROCEDURE? RED
ON GREEN AND THEN BLUE ON
GREEN CROSSHAIRS WILL BE
ALIGNED WITH THE GREEN CRT.
lOOSEN BOLTS A, B, C AND D TO
PIVOT THE RED CRT AND BOLTS
E, F, G AND H TO PIVOT THE
BLEU CRT.
<ENTER> TO CONTINUE
<EXIT> TO RETURN
menu 2
A
B
E
F
Action on CRT: Move the blue CRT away
CRT PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> TO CONTINUE
<EXIT> TO RETURN
menu 3
Case 1: Red crosshair on the
left of the green crosshair
Action on CRT: Move the red CRT
towards the green CRT
Case 1: Blue crosshair on the
left of the green crosshair
(to the ouside) from the green CRT
CRT PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> TO CONTINUE
<EXIT> TO RETURN
menu 4
Case 1: Red crosshair on the
right of the green crosshair
Action on CRT: Move the red CRT away
(to the ouside) from the green CRT
Case 1: Blue crosshair on the
right of the green crosshair
Action on CRT: Move the blue CRT
towards the green CRT