Barco R9040040 Instruction Manual page 28

Installation setup
Horizontal scan connectors
When changing the horizontal scan, insure that all three connectors are set in the same position.
The configuration of each connector is depending on its orientation i.e. on the position of the reference side of the connector.
Vertical scan connectors
When changing the vertical scan, insure that all three connectors are set in the same position.
The configuration of each connector is depending on its orientation i.e. on the position of the reference side of the connector.
Scan connector settings
The position of the scan connectors for the different mounting configurations can be summarized as follows:
j352
Reference side
image 4.4
Scan connector settings
After setting the scan connectors, put the protection plate back in place and secure it with the bolts.
4 - 4
j351
Configuration 1: Front/Table
j352 j351
Configuration 1: Front/Ceiling
j352 j351
Configuration 1: Rear/Table
j352 j351
Configuration 1: Rear/Ceiling
j352 j351
j151: Horizontal Red Scan Connector
j251: Horizontal Green Scan Connector
j351: Horizontal Blue Scan Connector
j251 j151 j252
j251 j151
j252
j251 j151
j252
j251 j151
j252
j251 j151
j252
j152: Vertical Red Scan Connector
j252: Vertical Green Scan Connector
j352: Vertical Blue Scan Connector
5976397 SPLIT PACK REALITY 909 09112001
j152
j152
j152
j152
j152