Table of Contents
Advertisement
Operation
Cleaning the steam oven
Risk of injury caused by hot
water.
At the end of a steam cooking
programme, hot water left in the
steam generator is pumped back into
the water container.
Take care not to tip the water
container when taking it out of the
appliance.
Remove the water container as
required.
Remove the spill guard and empty
the water container.
After each use, clean and dry the
whole steam oven as described in
"Cleaning and care".
Make sure the spill guard engages
correctly when installing it.
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the
container with fresh water.
Take out the water container and
replenish the water.
Push the water container into the
appliance.
The cooking programme is resumed.
64
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
–
Temperature
–
Power level
–
Duration
–
Finish at
–
Start at
Changing the temperature
You can permanently set the
recommended temperature to suit
your cooking preferences in
Recommended temperatures
Touch the temperature display.
Change the desired temperature.
Confirm with OK.
The cooking programme will restart with
the new desired temperature.
Settings
|
.
Advertisement
Table of Contents
