Table of Contents
Advertisement
Before connecting the appliance to the mains supply, ensure that
the connection data on the data plate (voltage and frequency) match
the mains electricity supply.
This data must correspond in order to avoid the risk of damage to
the appliance. Consult a qualified electrician if in any doubt.
Do not connect the steam oven to the mains electricity supply by
a multi-socket adapter or an extension lead. These do not guarantee
the required safety of the appliance (fire hazard).
For safety reasons, this steam oven may only be used when it has
been built in. This is necessary to ensure that all electrical
components are shielded.
This steam oven must not be used in a non-stationary location
(e.g. on a ship).
Never open the casing of the appliance. Tampering with electrical
connections or components and mechanical parts is highly
dangerous to the user and can cause operational faults.
While the appliance is under warranty, repairs should only be
undertaken by a Miele authorised technician. Otherwise the warranty
is invalidated.
Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
If the plug is removed from the connection cable or if the cable is
supplied without a plug, the appliance must be connected to the
electrical supply by a suitably qualified electrician.
If the connection cable is damaged, it must be replaced with a
special connection cable (see "Electrical connection").
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.
Warning and Safety instructions
11
Advertisement
Table of Contents
