Advertisement
Saber Spot WW
The UC IR (sold separately) infrared remote gives you control of
various functions (See below). To control the fixture you must aim the
remote at the front of the fixture and be no more than 30 feet away.
The Saber Spot WW is also compatible with the Airstream IR app.
The IR transmitter is available through any ADJ dealer or through the
ADJ parts website. Plug the transmitter into the headphone jack of
your iOS phone or tablet. To control your IR fixture you must raise
the volume to the maximum on your iOS phone or tablet and aim
the transmitter at the front of the fixture and be no more than 15
feet away. After you have purchased the Airstream IR transmitters,
the app is a free download from the app store for your iOS phone or
tablet. The app comes with 3 pages of control depending on the IR
fixture you are using. Please see below for IR functions including the
corresponding app page.
Works with App page 1.
STAND BY - Press this button to go into DMX mode or IR active.
FULL ON - Press this button down to fully light up the unit.
STROBE - Press this button to activate strobing. Use the "Dimmer
+/- to adjust the strobe rate.
FADE/GOBO - Press this button to activate fade mode. Continue to
press this button to find your desired fade speed.
"DIMMER +" and "DIMMER -" - Use these buttons adjust the strobe
rate and output intensity in color mode.
COLOR - This button is will activate the warm white color. You must
first press Full On then press Color twice until it blacksout. Then you
can use the Dimmer +/- to adjust the output intensity.
1-9 - These buttons are invalid for this fixture.
SOUND ON & OFF - These buttons are invalid for this fixture.
SHOW 0 - This button is invalid for this fixture.
ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 16
UC IR Operation
Saber Spot WW
Channel
Value
1
0 - 255
Saber Spot WW
Channel
Value
1
0 - 255
2
0 - 31
32 - 63
64 - 95
96 - 127
128 - 159
160 - 191
192 - 223
224 - 255
ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 17
1 Channel Mode
Function
WARM WHITE
0% - 100%
2 Channel Mode
Function
WARM WHITE
0% - 100%
SHUTTER/STROBE
LED OFF
LED ON
STROBING SLOW - FAST
LED ON
PULSE STROBE SLOW - FAST
LED ON
RANDOM STROBE SLOW - FAST
LED ON
Advertisement
