Advertisement
Saber Spot WW
Beam angle 45°
(double face)frost filter
Intensity(LUX)
Full LEDs
2870
749
4
3
2
1
0
1
2
3
4
0
1
2
45° Diameter(m)
0.83
1.66
ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 22
Photometric Chart
330
194
126
45
3
4
5
2.49
3.31
4.14
Saber Spot WW
With this feature you can connect the fixtures to one another
using the PowerCON input and output sockets. The quantity that
can be connected is 36 fixtures maximum @ 110V and a maxi-
mum 65 fixture's @ 240V. After maximum limit has been reached
you will need to use a new power outlet. They must be the same
fixtures. DO NOT mix fixtures.
Saber Spot WW
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses and mirror should be carried out periodically to
optimize light output. Cleaning frequency depends on the environ-
ment in which the fixture operates (I.e. smoke, fog residue, dust,
dew). In heavy club use we recommend cleaning on a monthly basis.
Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Saber Spot WW
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output in WW Dimmer Mode;
1. Be sure the strobe setting is set to value 255.
ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 23
Power Cord Daisy Chain
Cleaning
Trouble Shooting
Advertisement
