Advantech EPD-210 User Manual page 42

2. Change the switch Auto-Detect to the ON state and go to the next section
RESTful API Request Submission to configure request parameters and send
an API request using the POSTMAN tool.
3. (Optional) If you have some incoming jobs already, you can do the following
actions described below:
Draw (Auto-Detect: OFF Only): You can draw manually and will consume the queue
job where cursor is pointed.
Set First (Auto-Detect: OFF Only): You can move a queue job to the top-first and
make it the first priority to draw.
Clear All: You can clear all queue jobs if the rest of jobs are useless afterwards.
Data Table: By selecting the row on the data table, you can change the position of
the cursor on the data table and skip some jobs. For example, I want to skip both the
first and secondary jobs and change the position of the cursor to the row number 3,
and next time the agent will send the third job to the EPD-210 card, as shown in the
following image.
EPD-210 User Manual 34