Table of Contents
Advertisement
NFC Reader Connection
1.
Connect the LEO-D30 NFC reader to EPD NFC Agent.
Please connect the LEO-D30 NFC reader to any USB port on the computer
which EPD NFC Agent has been installed. It may take few minutes to configure
the USB setting for the first time.
2.
Open the EPD NFC Agent, and choose the right USB port which LEO-D30
Reader has been connected.
How to check if it is the right USB port?
Step 1. Unplug the LEO-D30 NFC reader.
Step 2. Open the EPD NFC Agent, and check those USB ports that were origi-
nally used.
Step 3. Connect the LEO-D30 NFC reader to the computer that installed EPD
NFC Agent with its USB cable.
Step 4. Click the Refresh button to get the newest USB port. You should get a
newly connected USB port, COM4 in this example, which is the right port for the
LEO-D30 Reader. See the following picture.
3.
Check it is properly connected.
EPD-210 User Manual
30
Advertisement
Table of Contents
