Table of Contents
Advertisement
(3).
Power supply
Main tester: 9V compound tandem cell;
receiver: 9V compound tandem cell;
(4).Testing cable types
STP/UTP 5E, 6E network cable, telephone cable, coaxial cable USB
signal cable and common metal wires connected with alligator clip;
(5).Detecting cable types
STP/UTP 5E, 6E network cable, telephone cable, coaxial cable USB
signal cable and common metal wires connected with alligator clip;
(6).Operating environment temperature/humidity
℃
℃
-10
~ +60
/20% ~ 70%;
(7).Testing device interface
Main unit: RJ45 (M), RJ45 (S), loop interface, RJ11, BNC connector,
USB B-type female interface;
Remote identifier: RJ45, RJ11, BNC connector, USB A-type female
interface;
(8).Length measurement
Range: 1-1200m;
Calibration precision: 2% (+/-0.5m, or +/-1.5 feet); (calibration;
cable >10m) measurement precision: 3% ((+/-0.5m, or +/-1.5 feet);
(AMP, CAT5E, 6E cable material)
Display unit: meter, inch, yard;
(9).Length calibration
User may use a cable at a known length to set a calibration coefficient,
and the calibration length is over 10m;
(10). Line sequence and cable failure positioning
Used for Line finding two-core cable or cable with over two cores;
(11). Line finding function
Used for Line finding two-core cable or cable with over two cores;
(12). Automatic delay of power on/off
It will automatically power off in case of no operation within 15 minutes.
Your wiring expert
-03-
Advertisement
Table of Contents
