Table of Contents
Advertisement
Your wiring expert
And then press "UP" or "DOWN" key, the following interface will further
be shown:
It indicates that length of telephone cable is 10.1m. At this time, press any key
to return to the main menu, and then press "ENTER" key for re-test.
(2).If to insert one end of the RJ11 cable to be tested into "TEL(6)" port of the
main tester, the other end is an open circuit, select telephone cable test mode,
return to the main menu, and select length test, and then press "ENTER" key to
perform length test with the equipment, the following interface will be shown:
And then press "UP" or "DOWN" key, the following interface will further be shown:
It indicates that length of telephone cable is 10.1m. At this time, press anykey to
return to the main menu, and then press "ENTER" key for re-test.
Test result 8: BNC cable length test
If to insert one end of the BNC cable to be tested into "BNC(2)" port of the main
tester, the other end is an open circuit, select BNC cable test mode, return to the
main menu, and select length test, and then press "ENTER" key to perform length
test with the equipment, the following interface will be shown: (Coaxial cable
length can be tested only with open circuit test mode, and other methods are
incapable to test its length)
It indicates that length of BNC cable is 10.1m. At this time, press any key to
return to the main menu, and then press "ENTER" key for re-test.
M R -
5
0. m
0
M R -
6
0. m
0
1
0. m
0
Open
2
0. m
0
Open
3
10. m
1
Open
4
10. m
1
Open
5
0. m
0
Open
6
0. m
0
Open
1
10.1
Open
2
10.1
Open
-14-
m
m
Advertisement
Table of Contents
