Table of Contents
Advertisement
Your wiring expert
Main function characteristics
●
Capable to test open circuit, short circuit, cross connection, reverse
connection and pairing connection and broken wire positioning for
telephone cable, BNC cable and USB cable with M-S and M-R method,
and to visually display on LCD;
●
To perform crosstalk test on network cable for solving the potential
problem of slow speed;
●
To quickly find the target wire or cable among the plenty of network
cables, telephone cables, coaxial lines and other various kinds of wires;
●
Capable to measure length of network cable, coaxial cable, telephone
cable and USB cable with three method (M-S, M-R and OPEN), capable
to measure the cable at length of 1500m, and precision of measuring
cable length and position of broken line is up to 98%;
●
To make a accurate determination of open circuit position (left, right
or middle);
●
To perform cable tacking on exchanger or Router with power-on;
●
Low voltage prompt function is available in case of over low voltage
on the main unit;
●
Featuring simple control, large screen display and open-and-shut
test result;
●
Automatic delay power on-off and backlight function;
●
Lighting lamp enables to use in a dark environment;
●
Remote identifier is not necessary to perform length measurement
and pairing test;
●
Self-test function shall automatically make compensation due to
change of battery level and ambient temperature;
●
Single chip software watchdog design runs reliably.
Technical parameters
(1).
Overall dimensions
Main tester: 185X80X32mm;
Remote identifier: 107X30X24mm;
(2).
Display
Dot matrix 128X64 (Effective visible area 56X40mm);
Receiver: 218X46X29mm
-02-
Advertisement
Table of Contents
