Table of Contents
Advertisement
Test result 6: USB cable length test
(1). If to insert one end of the USB cable to be tested into "USB(4)" port of
the main tester, insert the other end into "USB(4)" port of "R" end, select
USB test mode, return to the main menu, and select length test, and then
press "ENTER" key to perform length test with the equipment, the following
interface will be shown:
It indicates that length of USB cable is 10.1m. At this time, press any key to
return to the main menu, and then press "ENTER" key for re-test.
(2).If to insert one end of the USB cable to be tested into "USB(4)" port of the
main tester, the other end is an open circuit, select USB test mode, return to
the main menu, and select length test, and then press "ENTER" key to perform
length test with the equipment, the following interface will be shown:
It indicates that length of USB cable is 10.1m. At this time, press any key to
return to the main menu, and then press "ENTER" key for re-test.
Test result 7: RJ11(TEL) cable length test
(1).If to insert one end of the RJ11 cable to be tested into "TEL(6)" port of the
main tester, insert the other end into "TEL(6)" port of "R" end, select telephone
cable test mode, return to the main menu, and select length test, and then
press "ENTER" key to perform length test with the equipment, the following
interface will be shown:
M R -
1
10. m
1
M R -
2
10. m
1
M R -
3
10. m
1
M R -
4
10. m
1
1
10. m
1
Open
2
10. m
1
Open
3
10. m
1
Open
4
10. m
1
Open
M R -
1
0. m
0
M R -
2
0. m
0
M R -
3
10. m
1
M R -
4
10. m
1
-13-
Your wiring expert
Advertisement
Table of Contents
