Table of Contents
Advertisement
Your wiring expert
Test result 3:
Insert one end the twisted-pair cable into "M" port, insert the other into "S" port,
select twisted-pair cable test mode, return to the main menu, and select length
test, and then press "ENTER" key to perform pairing and length test. The following
interface is shown:
At this time, press any key to return to the main menu, and then press "ENTER"
key for re-test.
Test result 4:
Insert one end the twisted-pair cable into "M" port, insert the other into "R" port,
select twisted-pair cable test mode, return to the main menu, and select length
test, and then press "ENTER" key to perform pairing and length test. The
following interface is shown:
At this time, press any key to return to the main menu, and then press "ENTER"
key for re-test.
Test result 5: Abnormal pairing and length test:
In case of unpaired lines found during pairing and length test, the following
paired lines will be firstly shown:
Wherein ,the last line shows line #7 only, and line #8 fails to find a pair. At this
time, if to press "DOWN" key, the unpaired line #8 length will be shown as below:
At this time, press any key to return to the main menu, and then press "ENTER"
key for re-test.
M S -
12
105.5m
M S -
36
105.3m
M S -
45
105.0m
M S -
78
105.2m
M R -
12
105.5m
M R -
36
105.3m
M R -
45
105.0m
M R -
78
105.2m
M R -
12
105.5m
M R -
36
105.3m
M R -
45
105.0m
7
105.2m
8
105.5m
-12-
Advertisement
Table of Contents
