QR5/QR5IP SERIES MANUAL
Relay 1 and 2 can be unlock using count down timer 01-98 hours or 00=lock or 99= unlimited unlock hold.
1.
Log-in to programming
2. Enter 45 then #
3. Enter relay 1 (door 1) then press #
or relay 2 (door 2) then press #,
Function Code 46 Firmware Version
To check the system's firmware version
1.
Log-in to programming
2. Enter 46 then #
Function Code 48 PBX Enable
If the system is installed behind a Private Branch Exchange (PBX) then 9 is necessary before dialing an outside line. If
this function is enabled then the system can only be dialing an outside line, it cannot dial the extension.
1.
Log-in to programming
2. Enter 48 then #
3. Enter 0= disable or 1= enable then press #
file:///C|/PACH-CO.COM-2022-B/online_manual/qr5_manual.htm[4/25/2022 2:58:06 PM]
then press #
then press #