Table of Contents
Advertisement
QR5/QR5IP SERIES MANUAL
It consists of three segments and 16 characters for each segment
1.
Log-in to programming
2. Enter 51 then #
3. 1st segment, enter the characters then press # see
4. 2nd segment, enter the characters then press # see
CHAPTER 5
Operations
5.1 Call from the System
1. Direct Call: press # then directory code, see
2. Scrolling: press 3 or 6 to scroll name then press # to call the selected name
5.2 Opening Door Remotely
Relay 1 (door 1), press 9
Relay 2 (door 2), press 8
5.3 Opening Door Using Access Code, Temporary Code, and Special Code
Access code Standard Operation is keyless entry code to open the door and door will be closed automatically, see
function code 06
Temporary Code is used for limited number of times, maximum 10 times then the code will be expired, see
33
Special Code is used to unlock hold door and then use same code to lock the door, see
Press * (display will stop scrolling) then press the 4, 5, 6, 7 or 8 digit access code as programmed on
5.4 Opening Door Using Card, Temporary Card, and Special Card
file:///C|/PACH-CO.COM-2022-B/online_manual/qr5_manual.htm[4/25/2022 2:58:06 PM]
Chapter 3
for keypad layout
Chapter 3
for keypad layout
function code 19
function code
function code 34
Function Code 09
Advertisement
Table of Contents
