Table of Contents
Advertisement
QR5/QR5IP SERIES MANUAL
4. Enter the number to access dial tone to dial an outside line, generally 9 is the default number for most PBX system,
then press #
5. Select delay time for the PBX system to access dial tone, generally 2-3 second delay is plenty of time, then press #
Function Code 49 Edit Existing Access Code, Temporary Code and Special Code
1.
Log-in to programming
2. Enter 49 then #
3. Editing an Access Code
Editing a Temporary Code,
Editing a Special code, then
Function Code 50 Erase Memory to Factory Default
Warning: This function code will erase the memory to factory default, no way to restore them unless the database has
been saved in the computer.
1.
Log-in to programming
2. Enter 50 then #
3. Enter 0= cancel or 1= continue then press #
Function Code 51 Welcome Screen
file:///C|/PACH-CO.COM-2022-B/online_manual/qr5_manual.htm[4/25/2022 2:58:06 PM]
click here
or
click here
or
click here
Advertisement
Table of Contents
