Table of Contents
Advertisement
QR5/QR5IP SERIES MANUAL
codes can be programmed.
1.
Log-in to programming
2. Enter 34 then #
3. Enter 0= delete 1= add then press #
4. Enter code 01-10 then press #
5. Enter 4-8 digit code, see digit setting on
6. Enter name then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 (24 hours) - 20 see
10. Enter Sat ID 0-7 then press # (enter 0 if no satellite connected to the QR5)
11. Enter
0= no more additional time zone then press # and return to
file:///C|/PACH-CO.COM-2022-B/online_manual/qr5_manual.htm[4/25/2022 2:58:06 PM]
function code 09
see
Chapter 3
for keypad layout
function code 17
then press #
step 3
to program another temporary code
Advertisement
Table of Contents
