Table of Contents
Advertisement
QR5/QR5IP SERIES MANUAL
3. Enter new master code then press #
Function code 01 - Add New Tenant Directory
A tenant directory consists of directory code (2, 3 or 4 digits depending on the setup, see fucntion code 19), tenant's name
and phone number.
1.
Log-in to programming
2.
Enter 01 then #
3.
Enter directory number (2, 3 or 4 digits depending on the setup, see function code 19) then #
4.
Enter name up to 16 characters (name can be a person name, apartment number, etc., directory is sorted in
alphabetical order) then press #
5.
Enter the tenant phone number up to 16-digit (land line, VOIP or cellular number, i.e: 9494982951) then press #.
Return to step 3 to enter another tenant directory
Function Code 02 - Edit Existing Tenant Directory
1.
Log-in to programming
2.
Enter 02 then #, the display will show
3.
Enter tenant directory number to be edited then #
file:///C|/PACH-CO.COM-2022-B/online_manual/qr5_manual.htm[4/25/2022 2:58:06 PM]
see
Chapter 3
for keypad layout
Advertisement
Table of Contents
