Function Code 45 Relay 1 And 2 Unlock Timer; Function Code 46 Firmware Version; Function Code 48 Pbx Enable - PACH & COMPANY QUANTUM QC Series Manual

QC SERIES MANUAL

Function Code 45 Relay 1 and 2 Unlock Timer

Relay 1 and 2 can be unlock using count down timer 01-98 hours or 00=lock or 99= unlimited unlock hold.
1. Log-in to programming
2. Enter 45 then #
3. Enter relay 1 (door 1) then press #
or relay 2 (door 2) then press #,

Function Code 46 Firmware Version

To check the system's firmware version
1. Log-in to programming
2. Enter 46 then #

Function Code 48 PBX Enable

If the system is installed behind a Private Branch Exchange (PBX) then 9 is necessary before dialing an outside line. If this
function is enabled then the system can only be dialing an outside line, it cannot dial the extension.
1. Log-in to programming
2. Enter 48 then #
file:///C|/PACH-CO.COM-2022-B/online_manual/qc_series_manual.htm[4/27/2022 8:58:09 AM]
then press #
then press #