Table of Contents
Advertisement
INSPECTION
It is very important to regularly check the machine in order to detect and prevent wear and
tear, damage, etc.
•
Lubricate moving parts regularly: All lubrication points should be lubricated after every
30 hours of use. NOTE! Pump grease slowly and carefully to prevent damage to the seal-
ing layer. Be extra careful when using high-pressure grease gun.
IMPORTANT! FOR REPAIRS BEYOND THE PREVIOUSLY LISTED ADJUSTMENTS, PLEASE CONTACT YOUR LOCAL
DEALER.
CLEANING AND RINSING:
Cleaning and washing extends the life of the machine. Make it a habit to clean the machine
directly after use, before the dirt sticks firmly. Be careful when high-pressure used, decals, in-
structions, and the hydraulic motor can be damaged. Do not exceed 70 bar / 1000PSI water
pressure during wash. Lubricate the machine after washing and cleaning. Especially when the
machine is to be stored.
Before storing the machine, it might be good to perform service in order to ensure that
the machine operates in the following season.
1.
Paint on the machine if needed, to prevent rusting
2.
Check if the machine is damaged, tighten all loosen bolts and nuts
3.
Lubricate all grease perform service in
4.
Store in a dry, clean place, cover for extra protection
RECYCLING
Disposal of the product, disassemble and transport to the municipality's recycling station.
Contact your local authority for further information.
NOTE! Grease fittings located under the
machine
11
Advertisement
Table of Contents
