Transport And Storing; Maintenance And Service - Kellfri 35-HKK Operating Instructions Manual

Hydraulic strimmer
Hide thumbs Also See for 35-HKK:
Table of Contents

Advertisement

TRANSPORT AND STORING

Make sure there are no people, children and foreign objects around the area before transport-
ing the machine. Always take an extra caution during the transport. Ensure that the product
is well secured and that transport brackets are mounted. Always place the load as low as pos-
sible. Respect the danger zone even during transport. When lifting the equipment, never go
underneath suspended loads. Trailer used for transport should have working brakes.
Always store the machine in a dry place preferably underneath a cover when not in use. Ensure
that the product is stable and not likely to tip over. Never let children play where the machine
is being stored. Always keep in mind the risk of tipping!
TRANSPORT POSITION
When the strimmer is to be moved from one place to another, it shall be in the transport
position. The tractor engine must be turned off and the rotor come to complete stop before
adjusting the machine to transport position.
Remove all the grass from the machine before you leave the field. Never move from one place
to another with the rotor running.

MAINTENANCE AND SERVICE

Ensure that the unit is stable and cannot tip over during maintenance and service. Replace
damaged or worn parts immediately to reduce the risk of abrasion. Always perform mainte-
nance, service and inspection, as recommended. Use only original replacement parts or spare
parts with equivalent performance to reduce the risk of damage.
For spare parts: contact Kellfri Service
Check all bolts and nuts are tightened after maintenance and service. Always test the machine
before work is started.
Disconnect the equipment from the towing vehicle when it is being repaired.
Regularly check the condition of the equipment before the failure is a fact.
Discovered cracks, twisting, bending, gaps or fatigue stop the operation and rectify faults.
Worn parts should be replaced.
Re-tighten all nuts and bolts after a few hours of driving, there after daily after use.
10

Advertisement

Table of Contents
loading

Table of Contents