Table of Contents
Advertisement
Section 2 Installation
!
Introduction
PN 50702:B2 4/14/03
www.PDF-Zoo.com
WARNING: Use extreme caution when working with the
APS-6R. High voltage and AC line-connected circuits are
present. Turn off and remove all power sources. To reduce
the risk of electric shock make sure to properly ground the
unit.
This section contains instructions for mounting, wiring, configuring
and servicing the APS-6R.
Installation topics covered in detail:
Topic
Mounting to a CAB-3/CAB-4
Series Cabinet
Field Wiring
Wiring Multiple APS-6Rs
Connecting to an ICM/ICE
Powering a Control Module
Configuring
Servicing
Additional information regarding installation may be found in the
appendices.
firealarmresources.com
Section 2 Installation
Refer to...
Page 12 in "Mounting in
CAB-3/CAB-4 Series
Cabinets"
Page 13 in "Field Wiring an
APS-6R"
Page 15 in "Connecting
Multiple APS-6R Power
Supplies"
Page 16 in "Connecting the
APS-6R to an ICM/ICE
Module"
Page 17 in "Supplying
Power to a Control Module"
Page 18 in "Configuring the
APS-6R"
Page 19 in "Servicing the
APS-6R"
11
Advertisement
Table of Contents
